How-To Guides

How to Control Discounts with Price Approvals in ZartonAI

Presets for the adjustments you allow, a reason and a manager’s yes for anything below your catalogue price — so discounts stay on purpose

Zarton EditorsNov 5, 2026 · 7 min read
Listen to this article

A customer pushes back on the price, your tech wants to keep them happy, and the job gets knocked down 15% on the spot. Do that a few times a week across a crew and the margin you built into your prices quietly disappears — and nobody can say who agreed to it or why.

This guide shows you how to use price approvals and discount presets in ZartonAI. Your team can still adjust prices when it makes sense, but anything that goes below your catalogue price needs a reason and a manager’s yes before the estimate or invoice reaches the customer. Everyday adjustments, like an emergency call-out rate, become presets everyone uses the same way.

Why discounts need a gate

Most trade businesses do not lose money on big decisions. They lose it on small, well-meant ones: a round-down here, a “mate’s rate” there, a price matched to a competitor without checking what was included. Each one is reasonable on its own. Together they are the gap between what job costing says a job should have made and what it did make.

Price approvals in ZartonAI do not stop anyone from offering a better price. They make sure that a price below your catalogue is a decision a manager made, with a written reason, instead of something that happened in a driveway.

How to use price approvals and discount presets in ZartonAI

  1. Make sure your catalogue prices are right. Price approvals compare every line with the price of the service, product, stock item or equipment it was picked from in your catalogue. Before you rely on approvals, check that your services and products carry the prices you actually want to charge. If the catalogue price is wrong, every discount request will be measured against the wrong number.
  2. Set up discount presets for the adjustments you allow. Think about the price changes your business makes on purpose — an emergency call-out, a returning-customer rate, a seasonal offer. A manager can set these up once as named presets, like “Emergency”. Your team then picks the preset on a line instead of typing their own number, so the same situation gets the same price every time.
  3. Price the line from the catalogue on the estimate or invoice. When someone writes an estimate or invoice, they pick lines from the catalogue so the price and cost fill in. They can then apply a preset, or a one-off discount as a percent (like 10%) or an amount (like 25). Lines stay tied to the catalogue item they came from, which is what lets ZartonAI spot a price that has dropped below it.
  4. Give a reason when a line goes below the catalogue price. If a line ends up cheaper than its catalogue price, the person writing it adds a short reason — “matching a competitor’s written quote”, “repeat customer, third job this year”. That line becomes a price request waiting for a manager. The estimate or invoice cannot be sent to the customer until the request is decided.
  5. Open the list of prices waiting for approval. Managers see every waiting request in one list: who asked, why, the catalogue price, the price they asked for, and which estimate or invoice it is on. Each request has a number. You can look at all of them, or only the ones on one estimate or invoice — useful when a salesperson asks why their quote will not send.
  6. Approve or turn it down, with a note. Read the request, then approve it or reject it, and add a note if you want to explain. Whoever asked is told either way. Approved, the line keeps its price and the document can go out. Rejected, they know to put the line back at the catalogue price or to rethink the job before sending.
  7. Send the estimate or invoice as normal. Once nothing on it is waiting, the estimate or invoice is sent the usual way, with its PDF and link. The customer sees the agreed price; your team has a record of who asked for it, why, and who said yes.

Presets, discounts and approvals at a glance

OptionWho sets itBest for
Catalogue priceOwner or manager, onceYour normal price for each service, product, stock item or piece of equipment
Preset (e.g. “Emergency”)A manager, ahead of timeRepeat situations you price the same way every time
Line discountWhoever writes the lineA one-off percent or amount off a single line
Price requestRaised by the writer, decided by a managerAny line that ends up below its catalogue price

Tips and common mistakes

  • Write reasons a stranger would understand. “Customer asked” tells a manager nothing. “Competitor quoted $1,850 in writing, same panel and permit” lets them decide in ten seconds.
  • Turn repeat requests into presets. If the same kind of request keeps coming in — senior discount, second unit on the same visit — make it a preset so nobody has to ask next time.
  • Check the list before you chase a quote. If a salesperson says a quote “won’t send”, look at the waiting prices for that estimate first. It is usually one line waiting on you.
  • Decide quickly. A request that sits for two days is a quote the customer has not seen. Make a habit of clearing the list each morning; the daily owner briefing is a good moment.
  • Don’t lower the catalogue to dodge approvals. If prices are always being cut, the fix may be your catalogue — but change it on purpose, not one line at a time.

Do it with Claude

ZartonAI works with Claude through the Zarton connector, so managers can clear approvals in plain language from wherever they are. Claude lists what is waiting, reads each request back to you — who asked, why, the catalogue price and the asked-for price — and only approves or rejects once you have said which way. Try requests like:

“What prices are waiting for my approval?”

“Why won’t EST-14 send?”

“Approve Marco’s price on the Delgado water heater quote, and tell him thanks for writing a clear reason.”

“Turn down the 20% off on INV-31 — tell her the most we can do is the returning-customer preset.”

“Draft an estimate for the panel upgrade at Oak Street with the Emergency preset on the labour.”

When Claude writes an estimate for you and a line comes out below the catalogue price, it adds the reason you gave and the line waits for approval like any other. See our guide to creating and sending estimates for the rest of that flow.

Frequently asked questions

Who can approve a price request?

A manager who is allowed to approve prices. Anyone writing an estimate or invoice can ask for a lower price with a reason, but the decision belongs to that manager.

Does this work on invoices as well as estimates?

Yes. Lines priced below the catalogue on both estimates and invoices go to the same approval list, and either kind of document waits until its requests are decided.

What is the difference between a preset and a discount?

A preset is a named price adjustment a manager has set up ahead of time, like “Emergency”, so the same situation is priced the same way every time. A discount is a one-off percent or amount typed on a single line.

Why won’t my estimate send?

The most common reason is a line priced below the catalogue that is still waiting for a manager. Check the list of prices waiting for approval for that estimate, and ask a manager to decide it.

Does Claude approve prices for me?

No. Claude can list what is waiting and read each request back to you, but it only approves or rejects a request after a manager has said which way.

Related reading

Keep your discounts on purpose. Set up a preset and clear your first price request in ZartonAI today.

Try it at zartonai.com

Comments

No comments yet — be the first to share your thoughts.

Join the discussion

Comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Keep reading

All posts

Run your whole business from one conversation.

Get startedTalk to us